Murano FWD V6-3.5L (VQ35DE) (2006)
How To Use Check Sheet Table
HOW TO USE CHECK SHEET TABLE
1. Unit names displayed on CONSULT-II.
2. "No indication": Put a check mark to it if the unit name described in step 1 is not displayed on "SELECT SYSTEM" screen of CONSULT-II.
(Unit communicating with CONSULT-II via CAN communication line)
"-": Column not used (Unit communicating with CONSULT-II excluding CAN communication line)
3. "NG": Display "NG" when malfunction is detected in the initial diagnosis of the diagnosed unit. Replace the unit if "NG" is displayed.
"-": Column not used (Initial diagnosis is not performed.)
4. "UNKWN": Display "UNKWN" when the diagnosed unit does not transmit the data normally. Put a check mark to it if "UNKWN" is displayed on
CONSULT-II.
5. "UNKWN": Display "UNKWN" when the diagnosed unit does not receive the data normally. Put a check mark to it if "UNKWN" is displayed on
CONSULT-II.
"-": Column not used (It is not necessary for CAN communication trouble diagnosis.)
NOTE: CAN communication diagnosis checks if CAN communication works normally. (Contents of data are not diagnosed.)
-
When the initial conditions are reproduced, refer to "Example of Filling in Check Sheet When Initial Conditions Are Reproduced".
-
When the initial conditions are not reproduced, refer to "Example of Filling in Check Sheet When Initial Conditions Are Not Reproduced".