Murano FWD V6-3.5L (VQ35DE) (2006)
Air Flow Meter/Sensor: Service and Repair
AIR CLEANER AND AIR DUCT
REMOVAL
1. Remove radiator cover grills (right and left side).
2. Remove air duct (inlet).
3. Disconnect harness connector from mass air flow sensor.
4. Disconnect PCV hose.
5. Remove air cleaner cases (upper and lower) with mass air flow sensor and air duct assembly disconnecting their joints.
^
Add mating marks as necessary for easier installation.
6. Remove mass air flow sensor from air cleaner case (upper), as necessary.
CAUTION: Handle mass air flow sensor with following cares.
^
Do not shock it.
^
Do not disassemble it.
^
Do not touch its sensor.
7. Remove resonator, removing left side fender protector (front), as necessary.
INSPECTION AFTER REMOVAL
Inspect air duct assembly for crack or tear.
^
If anything found, replace air duct assembly.
INSTALLATION
Note the following, and install in the reverse order of removal.