Murano FWD V6-3.5L (VQ35DE) (2006)
5. Place the dent of alignment gauge onto the projection of center plate (SST) and tightly contact them to measure.
Camber, caster, kingpin inclination angles: Refer to FSU-16, "SERVICE DATA AND SPECIFICATIONS (SDS)". See: Specifications/Front
Suspension
CAUTION:
-
If camber, caster, or kingpin inclination angle is outside the standard, check front suspension parts for wear and damage, and replace suspect
parts if necessary.
-
Kingpin inclination angle is reference value, no inspection is required. (Due to the type of suspension, the kingpin inclination angle cannot be
measured correctly using a normal alignment tester.)