Pathfinder 2WD V6-3.5L (VQ35) (2003)
/Page-540010.png)
a.
Look at the crack(s) and confirm it is within the Outer Ribs of the Front Tube (see Figure 4).
^
If the crack(s) is within the Outer Ribs, go to the next step.
^
If the crack(s) is NOT within the Outer Ribs, this bulletin does not apply.
b.
Thoroughly clean the cracked side seams to remove all dust, dirt, and debris.
c.
Completely fill the provided (syringe) Applicator with 6ml of Exhaust Sealant.
^
This amount (6ml) of Sealant will be used for one Exhaust Patch.
d.
Apply 6ml of Sealant evenly between the two bumps ONLY of each Exhaust Patch (see Figure 5).
e.
Install the Exhaust Patches to both Front Tube Side Seams, making sure:
