Pathfinder 2WD V6-3.5L (VQ35) (2003)
Fuel Gauge Sender: Service and Repair
FUEL PUMP AND FUEL LEVEL SENSOR UNIT
1. Release fuel pressure from fuel line. Refer to "Fuel Pressure Release".
2. Remove inspection hole cover located behind the rear seat.
3. Disconnect harness connectors and fuel tubes from upper plate of fuel level sensor unit.
-
Put mating marks on tubes for correct installation.
4. Remove fuel level sensor unit retainer and fuel level sensor unit.
5. Disconnect the quick connectors .
-
Hold the sides of the connector, push in tubs and pull out the tube.