Pathfinder 2WD V6-3.5L (VQ35) (2003)
CONSULT-II Data Link Connector (DLC) Circuit
INSPECTION PROCEDURE
If the CONSULT-II cannot diagnose the system properly check the items.
NOTE: The DDL1 and DDL2 circuits from DLC pins 12, 13, 14 and 15 may be connected to more than one system. A short in a DDL circuit connected
to a control unit in one system may affect CONSULT-II access to other systems.
How to Check Terminals
Connector and Terminal Pin Kit
Use the connector and terminal pin kit listed when replacing connectors or terminals.
The connector and terminal pin kit contains some of the most commonly used NISSAN connectors and terminals.
How to Probe Connectors
Connector damage and an intermittent connection can result from improperly probing of the connector during circuit checks. The probe of a digital
multimeter (DMM) may not correctly fit the connector cavity. To correctly probe the connector follow the procedures using a "T" pin. For the best
contact grasp the "q" pin using an alligator clip.