Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
Alarm System Transponder: Service and Repair
With Intelligent Key System
NATS ANTENNA AMP.
Removal and Installation
NOTE:
-
If NATS antenna amp. is not installed correctly, NVIS (NATS) system will not operate properly and "SELF-DIAG RESULTS" on CONSULT-III
screen will show "LOCK MODE" or "CHAIN OF IMMU-KEY".
-
Initialization is not necessary when only the NATS antenna amp. is replaced with a new one.
REMOVAL
1. Disconnect the battery negative terminal. Refer to See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.
2. Remove cluster lid A. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Exploded View.
3. Remove the bolt, disconnect the electrical connector, and remove the NATS antenna amp (1).
INSTALLATION
Installation is in the reverse order of removal.