Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
4. After the message "Safe to Remove Hardware" is displayed, disconnect the USB cable from the C-III computer.
5. Push the Eject button at the right of the CF card slot and carefully remove the CF adapter.
NOTE:
When not in use, store the CF adapter in its original plastic bag.
Section 7 - Verifying the Upgrade Result
SECTION 7: VERIFYING THE UPGRADE RESULT
^ When the map data upgrade operation is complete, confirm that the HDD navigation system is operating correctly.
^ Make sure the CF adapter is disconnected from the navigation system before performing the following steps.
1. Turn the ignition ON.
^ If the ignition is already ON, turn it OFF and then back ON.
2. The Program Loading screen as shown in Figure 7-1 will display.
^ This process may take only a few seconds to complete or it may take a few minutes.