nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Trim Panel > < Headliner|Service and Repair
Page 2
background image

9. Release the front roof console clips, using a suitable tool and remove the front roof console.
-

Disconnect the harness.

10. Remove the center room and the rear room lamp assemblies.
11. Remove the rear upper overhead duct (if equipped). Refer to See: Heating and Air Conditioning/Air Duct/Service and Repair/Removal And

Installation.

12. Remove the headlining.

NOTE:
Use an assistant to steady the headlining while lowering from roof.
-

Remove the clips from center of headlining.

-

Remove the clips from rear of headlining.

-

Disconnect the rear washer tube at front connection, allow to drain.

-

Disconnect the harnesses and rear washer tube rear connections.

13. Remove the overhead grilles, then transfer them to the new headlining.
14. Remove the assist grip brackets from the roof.

INSTALLATION
Installation is in the reverse order of removal.

Trim Panel > < Headliner|Service and Repair