Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
5. Remove the master cylinder assembly.
INSTALLATION
Installation is in the reverse order of removal.
-
Use new master cylinder assembly nuts for installation.
CAUTION:
Do not reuse the master cylinder assembly nuts.
-
Refill the brake fluid and bleed the air. Refer to See: Brake Bleeding/Service and Repair.
CAUTION:
-
Refill using recommended brake fluid. Refer to See: Brake Fluid/Service and Repair/Removal and Replacement.
-
Do not reuse drained brake fluid.
-
Adjust the brake pedal. Refer to See: Brake Pedal Assy/Service and Repair/Procedures/Standard Pedal, See: Brake Pedal Assy/Service and
Repair/Procedures/Adjustable Pedal.
-
Apply silicon grease to the brake booster at position (A) as shown when installing the master cylinder assembly to the brake booster.
Exploded View
BRAKE PEDAL
Exploded View
Adjustable Brake Pedal