Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
-
Never reuse the drained brake fluid.
-
After installation of the ABS actuator and electric unit (control unit), refill the brake system with new brake fluid. Then bleed the air
from the brake system. Refer to See: Brake Bleeding/Service and Repair.
-
If the ABS actuator and electronic unit (control unit) is replaced, the neutral position of the steering angle sensor must be reset. Refer to
See: Antilock Brakes / Traction Control Systems/Testing and Inspection/Programming and Relearning/Adjustment Of Steering Angle
Sensor Neutral Position/Special Repair Requirement.