Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
9. Loosen nuts with power tool in reverse order as shown.
-
Arrow Indicates Front
NOTE:
Disregard the numerical order No. 7 and 8 in removal.
10. Remove gaskets.
CAUTION:
Cover engine openings to avoid entry of foreign materials.
INSPECTION AFTER REMOVAL
Surface Distortion
-
Check the surface distortion of the exhaust manifold mating surface with straightedge and feeler gauge.
Limit : 0.3 mm (0.012 in)
-
If it exceeds the limit, replace exhaust manifold.
INSTALLATION (LH)
Installation is in the reverse order of removal.
Exhaust Manifold Gasket
Install the exhaust manifold gasket in direction as shown.
-
Arrow Indicates Front
-
A: Identification hole
Exhaust Manifold
-
If stud bolts were removed, install them and tighten to the specified torque.