Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
Air Bag(s) Arming and Disarming: Service and Repair
-
Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least 3 minutes.
-
Do not use air tools or electric tools for servicing.
-
Always work from the side of air bag module. Do not work from the front of it.
-
Always place air bag module with pad side facing upward.
-
Do not cause impact to the air bag module by dropping etc. Replace the air bag module if it has been dropped or sustained an impact.
-
After the work is completed, make sure no system malfunction is detected by air bag warning lamp.
-
In case a malfunction is detected by the air bag warning lamp, reset by the self-diagnosis function and delete the memory by
CONSULT-III.
-
If a malfunction is still detected after the above operation, perform self-diagnosis to repair malfunctions. Refer to