Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
AMBIENT SENSOR
Removal and Installation
REMOVAL
1. Remove the front grille. Refer to See: Body and Frame/Grille/Service and Repair.
2. Disconnect the ambient sensor (1) electrical connector.
Arrow Indicates Front
NOTE:
The ambient sensor is located behind the front grille, below the hood latch.
3. Release the ambient sensor (1) clip and then remove the ambient sensor (1).
INSTALLATION
Installation is in the reverse order of removal.