Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
Refrigerant Pressure Sensor / Switch: Service and Repair
REFRIGERANT PRESSURE SENSOR
Removal and Installation for Refrigerant Pressure Sensor
REMOVAL
1. Discharge the refrigerant. Refer to See: Heating and Air Conditioning/Service and Repair/Refrigeration System.
2. Disconnect the refrigerant pressure sensor harness connector and remove the refrigerant pressure sensor from the condenser.
CAUTION:
Be careful not to damage the condenser fins.
INSTALLATION
Installation is in the reverse order of removal. Refer to See: Heating and Air Conditioning/Description and Operation/Automatic Air
Conditioner/Refrigeration System/Component.
CAUTION:
-
Be careful not to damage the condenser fins.
-
Replace the O-ring of the refrigerant pressure sensor with a new one, then apply compressor oil to it for installation.
-
After charging refrigerant, check for leaks.