Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
Fusible Link: Testing and Inspection
POWER SUPPLY ROUTING CIRCUIT
Fusible Link
A melted fusible link can be detected either by visual inspection or by feeling with finger tip. If its condition is questionable, use circuit tester or test
lamp.
CAUTION:
-
If fusible link should melt, it is possible that critical circuit (power supply or large current carrying circuit) is shorted. In such a case,
carefully check and eliminate cause of incident.
-
Never wrap outside of fusible link with vinyl tape.
-
Never let fusible link touch any other wiring harness, vinyl or rubber parts.