Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
-
White Arrow Indicates Vehicle Front
-
Black Arrow Indicates Oil pan bolts
CAUTION:
-
Be sure the oil drain plug (3) is located to the rear of the transmission assembly.
-
Before installing oil pan bolts, remove any traces of old sealant from the sealing surfaces and threaded holes.
-
Do not reuse old gasket, replace with a new one.
-
Always replace the oil pan bolts as they are self-sealing.
-
Partially install the oil pan bolts in a criss-cross pattern to prevent dislocation of the gasket.
3. Tighten oil pan bolts in numerical order as shown.
Oil pan bolts : 7.9 N.m (0.81 kg-m, 70 in-lb)
4. Refill the A/T with fluid and check for fluid leakage. Refer to See: Fluid - A/T/Service and Repair/Checking A/T Fluid.