Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
Shift Interlock Cable: Service and Repair
Removal And Installation
KEY INTERLOCK CABLE
Removal and Installation
REMOVAL
1. Unlock slider from adjuster holder by squeezing lock tabs.
2. Remove casing cap from bracket of control device assembly and remove interlock rod from adjuster holder.
3. Remove holder from key cylinder and remove key interlock cable.
INSTALLATION
1. Set key interlock cable to key cylinder and install holder.
2. Turn ignition key to "LOCK" position.
3. Set selector lever to "P" position.