Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
Shifter A/T: Service and Repair
Removal and Installation
SHIFT CONTROL SYSTEM
Removal and Installation
REMOVAL
1. Remove the A/T finisher. Refer to See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Exploded View.
2. Disconnect the following from the A/T control device assembly.
-
A/T selector control cable
-
A/T key interlock cable
-
A/T device connector
3. Remove the A/T control device assembly.
INSTALLATION
Installation is in the reverse order of removal.