Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
8. Install bolts (A), (B) and (C) in control valve with TCM. Tighten bolt (1), (2) and (3) temporarily to prevent dislocation. After that tighten them in
order (1 to 2 to 3) and then tighten other bolts.
Tighten control valve with TCM bolts to the specified torque.
Arrow Indicates Vehicle Front
9. Connect A/T fluid temperature sensor 2 connector (A).
10. Securely fasten terminal cord assembly and A/T fluid temperature sensor 2 harness with terminal clips (Black Arrow).
-
Black Arrow Indicates Terminal clips (4)
11. Connect revolution sensor connector.
12. Securely fasten revolution sensor harness with terminal clip.
13. Install oil pan to transmission case. Refer to See: Fluid Pan/Service and Repair.