Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
NOTE:
Circular clip installation position: Rear final drive side
4. Remove the side oil seal using suitable tool.
CAUTION:
Do not to damage gear carrier.
INSTALLATION
1. Apply multi-purpose grease to the lips and differential gear oil to the circumference of the new side oil seal. Then drive the new side oil seal in
evenly until it becomes flush with the gear carrier using Tool.
Tool number : KV38100200 (J-26233)
CAUTION:
-
Do not reuse side oil seal.
-
Do not incline the new side oil seal when installing.
-
Apply multi-purpose grease to the lips and differential gear oil to the circumference of the new side oil seal.
2. Install the side flange using Tool.
a. Install the Tool to the side oil seal as shown.
Tool number : KV38107900 (J-39352)
b. Insert the side flange until the serrated part of the side flange has engaged the serrated part of the side gear and remove the Tool.
c. Drive in the side flange using suitable tool.