Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
Power Window Switch: Service and Repair
Power Window Main Switch
POWER WINDOW MAIN SWITCH
Removal and Installation
REMOVAL
1. Remove the power window main switch finisher (2) from the front door finisher LH. Refer to See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Panel/Service and Repair.
2. Remove the three screws (A) from the power window main switch (1), then separate from the finisher (2).
INSTALLATION
Installation is in the reverse order of removal.