Pathfinder 2WD V6-4.0L (VQ40DE) (2009)
Power Window Switch: Service and Repair
Front Power Window Switch
FRONT POWER WINDOW SWITCH
Removal and Installation
REMOVAL
1. Remove the front power window switch finisher (2) from the front door finisher RH. Refer to See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Panel/Service and Repair.
2. Release the four tabs (A), two on each side, then separate the front power window switch (1) from the finisher (2).
INSTALLATION
Installation is in the reverse order of removal.