Pathfinder 2WD V8-5.6L (VK56DE) (2008)
Air Flow Meter/Sensor: Service and Repair
AIR CLEANER AND AIR DUCT
Removal and Installation
EM-165 Components
REMOVAL
1. Remove the engine room cover using power tool.
2. Disconnect the harness connector from air cleaner case (upper).
3. Remove the air duct and resonator assembly and air cleaner case (upper).
4. Remove air cleaner filter and air cleaner case (lower).
^
Add marks as necessary for easier installation.
CAUTION:
Handle mass air flow sensor with care.
^
Do not shock it.
^
Do not disassemble it.
^
Do not touch its sensor.
INSPECTION AFTER REMOVAL
Inspect air duct for crack or tear.
^
If anything found, replace air duct.
INSTALLATION
Installation is in the reverse order of removal.