Pathfinder 2WD V8-5.6L (VK56DE) (2008)
15. Remove O-ring from A/T assembly harness connector.
16. Disconnect TCM connectors.
CAUTION: Do not damage connectors.
17. Remove A/T assembly harness connector from control valve with TCM using suitable tool.
18. Disconnect TCM connector and park/neutral position switch connector.
CAUTION: Do not damage connectors.
Installation
CAUTION: After completing installation, check A/T fluid leakage and fluid level. Refer to TM-180. See: Service and Repair/Procedures