Pathfinder 4WD V6-2960cc 3.0L SOHC MFI (VG30E) (1990)
Front Crankshaft Seal: Service and Repair
OIL SEAL INSTALLING DIRECTION
FRONT OIL SEAL
1. Remove timing bell and crankshaft sprocket.
2. Remove oil pump assembly.
3. Remove front oil seal from oil pump body.
4. Apply engine oil to new oil seal and install it using suitable tool.
REAR OIL SEAL
1. Remove flywheel or drive plate.
2. Remove rear oil seal retainer.
3. Remove rear oil seal from retainer.
4. Apply engine oil to new oil seal and install it using suitable tool.
5. Install rear oil seal retainer with a new gasket to cylinder block.