nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Fluid - Differential|Capacity Specifications|Page 3502 > < Fluid - Differential|Capacity Specifications
Page 1
background image

Fluid - Differential: Fluid Type Specifications

Standard Differential Gear

Type ...................................................................................................................................................................................................................  API GL-5
Viscosity / Temperature Recommendations:

Below 10°C (50°F) ...............................................................................................................................................................................................  75W
Below 30°C (86°F) ...............................................................................................................................................................................................  80W
Below 40°C (104°F) .......................................................................................................................................................................................  75W-90

OR .............................................................................................................................................................................................................  80W-90

Between 30 & -10°C (86 & 14°F) ........................................................................................................................................................................  85W
Between 40 & 0°C (104 & 32°F) .............................................................................................................................................................................  90
Above 10°C (50°F) ................................................................................................................................................................................................  140

Limited Slip Differential (L.S.D.)

Type [1] ..................................................................................................................................................................................................  L.S.D. API GL-5

[1]

a) Use only LSD gear oil API GL-5 and SAE 80W-90 approved for Nissan LSD.
b) SAE 90 is acceptable in ambient temperatures above -18°C (0°F)
c) Contact a Nissan dealer for a list of approved oils.

NOTE:  To verify L.S.D.:
-

Lift both rear wheels off the ground.

-

Turn one rear wheel by hand.

-

If both rear wheels turn in the same direction simultaneously, vehicle is equipped with limited-slip differential.

Fluid - Differential|Capacity Specifications|Page 3502 > < Fluid - Differential|Capacity Specifications