Pathfinder 4WD V6-3.3L (VG33E) (1996)
/Page-2330001.png)
Speedometer Module: Description and Operation
With the ignition switch in the ON or START position, power is supplied
^
through 1O A fuse [No. (7), located in the fuse block (J/B)]
^
to combination meter terminal (15)
Ground is supplied
^
to combination meter terminals (23) and (35)
^
through body grounds (M4) and (M27).
The vehicle speed sensor provides a voltage signal to the combination meter for the speedometer.
The voltage is supplied
^
to combination meter terminals (8) and (12) for the speedometer
^
from terminals (1) and (2) of the vehicle speed sensor.
The speedometer converts the voltage into the vehicle speed displayed.
