Pathfinder 4WD V6-3.3L (VG33E) (1996)
/Page-188010.png)
2. Select "MANU TRIG" and "HI SPEED" in "DATA MONITOR" mode with CONSULT, and select "FR O2 SEN-B1" and "FR O2 MNTR-B1".
3. Hold engine speed at 2,000 rpm under no load during the following steps.
4. Touch "RECORD" on CONSULT screen.
5. Check the following.
-
"FR O2 MNTR-B1" in "DATA MONITOR" mode changes from "RICH" to "LEAN" to "RICH" 5 times in 10 seconds.
-
5 times (cycles) are counted as shown.
-
"FR O2 SEN-B1" voltage goes above O.6V at least once.
-
"FR O2 SEN-B1" voltage goes below 0.35V at least once.
-
The voltage never exceeds 1.OV.
-
Maximum voltage should be over O.6V at least one time.
-
Minimum voltage should be below 0.35V at least one time.
Without Tools
1. Start engine and warm it up sufficiently.
