Pathfinder 4WD V6-3.3L (VG33E) (1996)
2.
Remove any rubber residue or dirt remaining on the strut rod (see Figure 2).
3.
Apply a silicone grease (Dow Corning Moly-coat 822M, Moly-coat 33M or equivalent) to the strut rod as shown, approximately 40 mm (1.5 in.).
Do not apply grease to the rubber side.
4.
Apply a soap solution around the top of the rubber as shown to ease installation.
5.
Reinstall the bumper rubber into the spring upper seat.