nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Throttle Position Sensor/Switch, A/T > < Overdrive Switch, A/T|Locations|Page 8296

Pathfinder 4WD V6-3.3L (VG33E) (1996)

Page 1
background image

Shift Interlock Switch: Service and Repair

Inhibitor Switch Adjustment

1. Remove manual control linkage from manual shaft of A/T assembly.
2. Set manual shaft of A/T assembly in "N" position.
3. Loosen inhibitor switch fixing bolts.

4. Insert pin into adjustment holes in both inhibitor switch and manual shaft of A/T assembly as near vertical as possible.
5. Reinstall any part removed.
6. Check continuity of inhibitor switch. 

Throttle Position Sensor/Switch, A/T > < Overdrive Switch, A/T|Locations|Page 8296