Pathfinder 4WD V6-3.5L (VQ35) (2004)
/Page-1826004.png)
1. Make an 8.5 mm (0.335 in) diameter hole in air bag module bracket [SST: KV99105300 (J41246)] at the position shown in figure.
2. Firmly secure air bag module bracket [SST: KV99105300 (J41246)] in a vise.
3. Match the two holes in air bag module bracket (held in vise) and passenger air bag module and fix them with two bolts [M8 * 25 - 30 mm (0.98 -
1.18 in)].
CAUTION: If a gap exists between passenger air bag module and air bag module bracket, use a piece of wood inserted in the gap to stabilize the
air bag module.
4. Connect deployment tool adapter [SST: KV991065S0 (J38381- 30)] to deployment tool [SST: KV99106400 (J38381)] connector and air bag
module connector.
5. Connect red clip of deployment tool to battery positive terminal and black clip to negative terminal.
6. The lamp on the right side of the tool, marked "deployment tool power", should glow green, not red.
7. Press the button on the deployment tool. The left side lamp on the tool, marked "air bag connector voltage", will illuminate and the air bag module
