Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
-
When CAN communication operation is detected, it switches to CAN communication status.
-
When a state of the following switches changes, it switches to CAN communication state:
-
Ignition switch
-
Key switch
-
Hazard switch
-
Door lock/unlock switch
-
Front door switch (LH, RH)
-
Rear door switch (LH, RH)
-
Back door switch
-
Glass hatch ajar switch
-
Combination switch (passing, lighting switch 1st position, front fog lamp)
-
Keyfob (lock/unlock signal)
-
Front door lock assembly LH (key cylinder switch)
-
When control performed only by BCM is required by switch, it shifts to CAN communication inactive mode.
-
Status of combination switch reading function is changed.
SYSTEMS CONTROLLED BY BCM DIRECTLY
-
Power door lock system.
-
Remote keyless entry system.
-
Power window system.
-
Sunroof system.
-
Room lamp timer.
-
Warning chime system.
-
Turn signal and hazard warning lamps system.
-
Trailer turn signal and hazard warning lamps system. Refer to "TRAILER TOW".
-
Rear wiper and washer system.
NOTE: Power supply only. No system control.
SYSTEMS CONTROLLED BY BCM AND IPDM E/R
-
Panic system. Refer to "REMOTE KEYLESS ENTRY SYSTEM".
-
Vehicle security system.
-
NVIS (NATS) system.
-
Headlamp, daytime light, auto light, tail lamp, fog lamp and battery saver control systems. Refer to "HEADLAMP (FOR USA)", "HEADLAMP
(FOR CANADA) - DAYTIME LIGHT SYSTEM -", "AUTO LIGHT SYSTEM", "FRONT FOG LAMP", and "PARKING, LICENSE PLATE
AND TAIL LAMPS".
-
Front wiper and washer system.
-
Rear window defogger system.
Part 1