Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
Rear Door Exterior Handle: Service and Repair
REAR DOOR LOCK
Component Structure
Removal and Installation
REMOVAL
1. Remove the rear door window regulator. Refer to "Rear Door Glass".
2. Remove door grommets, and remove outside handle nuts from the hole.
3. Remove outside handle.
4. Disconnect the outside handle cable connection.
5. Remove the inside door handle.
6. Disconnect the door lock and inside door handle cables from the inside door handle.
7. Disconnect the door lock actuator connector and remove the assembly.
INSTALLATION
Installation is in the reverse order of removal.