Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
WARNING: Clean dust on caliper and brake pad with a vacuum dust collector to minimize the hazard of airborne particles or other
materials.
CAUTION:
-
While removing cylinder body, never depress brake pedal because piston will pop out.
-
It is not necessary to remove bolts on torque member and brake hose except for disassembly or replacement of cylinder body. In this case, hang
cylinder body with a wire so as not to stretch brake hose.
-
Do not damage piston boot.
-
Burnish brake contact surface after refinishing or replacing rotors, after replacing pads, or it a soft pedal occurs at very low mileage.
DISASSEMBLY
1. Remove pads from cylinder body.
2. Remove sliding sleeve and boot from cylinder body.