Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
/Page-1573001.png)
Vacuum Brake Booster: Service and Repair
Vacuum Lines
VACUUM LINES
Removal and Installation
1. Disconnect brake booster hose from hose clip mounted on bracket.
2. Release clips and disconnect brake booster hose.
3. Remove check valve from brake booster.
4. Installation is in the reverse order of removal.
CAUTION:
^
Insert vacuum hose for at least 24 mm (0.94 inch).
^
Do not use lubricating oil during assembly.
Inspection
VISUAL INSPECTION
Check for improper assembly, damage and deterioration.
CHECK VALVE INSPECTION
Airtightness Inspection
