Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
4. Install camshaft brackets.
^
Remove foreign material completely from camshaft bracket backside and from cylinder head installation face.
^
Install camshaft bracket in original position and direction as shown.
^
Install camshaft brackets (No. 2 to 4) aligning the stamp marks as shown.
NOTE: There are no identification marks indicating left and right for camshaft bracket (No. 1).
^
Apply liquid gasket to mating surface of camshaft bracket (No. 1) as shown on right and left banks.
Use Genuine RTV Silicone Sealant or equivalent.
5. Tighten camshaft bracket bolts in the following steps, in numerical order as shown.