Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
Then tighten all connecting rod bolts 90° clockwise.
CAUTION: Always use Tool. Avoid tightening based on visual check alone.
Tool number: KV10112100 (BT-8653-A)
After tightening connecting rod bolts, make sure that crankshaft rotates smoothly.
Check the connecting rod side clearance.
CONNECTING ROD BOLT OUTER DIAMETER
^
Measure the outer diameter "d" at position shown.
^
If the reduction appears in a position other than "d", regard it as "d".
Limit ........................................................................................................................................................................................ 7.75 mm (0.3051 inch)
^
When "d" exceeds the limit (when it becomes thinner), replace connecting rod bolt with new one.
CONNECTING ROD BEARING
CONNECTING ROD BEARING
Undersize
Undersize
Connecting Rod Bearing Oil Clearance