Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
8. Loosen the 2 side bolts on the bracket.
9. Finger tighten the two front bolts.
10. Finger tighten the two side bolts.
11. Torque the bolts in the following sequence:
^ Torque the lower front bolt 56.9 - 65.7 Nm (5.8 6.7 kg-m, 42 48 ft-lb).
^ Torque the two side bolts 56.9 - 65.7 Nm (5.8 6.7 kg-m, 42 48 ft-lb).
^ Torque the upper front bolt to 24.5 - 31.4Nm (2.5 3.2kg-m, 18 23 ft-lb).
12. Check the part number on the front of the tensioner arm using a mirror (see Figure 4).
^ If the part number reads 11955-EA20A, DO NOT install a new auto-tensioner.
^ If the part number reads 11955-EA200, install a new auto-tensioner.
13. Install a new drive belt.
^ Do not reuse the existing belt.
14. Install the engine cover in reverse order of removal.