Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
INITIAL CORRECTION PROCEDURE FOR COMPASS
1. Pushing the (N) switch for about 10 seconds (with HomeLink universal transceiver) or the mode switch for about 13 seconds (without HomeLink
universal transceiver) will enter the initial correction mode. The "CAL" icon will illuminate.
2. Turn the vehicle slowly in an open, safe place. The compass will be calibrated once it has tracked 3 complete circles.
NOTE: In places where the terrestrial magnetism is extremely disturbed, the initial correction may start automatically.