nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Engine - Buzz/Whine From Timing Chain Area|Page 2760 > < Engine - Buzz/Whine From Timing Chain Area|Page 2758

Pathfinder 4WD V6-4.0L (VQ40DE) (2006)

Page 1
background image

Oil Filter: Service and Repair

OIL FILTER

Changing Oil Filter

1. Remove the undercover using power tool.

2. Remove the oil filter using Tool.

Tool number: KV10115801 (J-38956)

WARNING:  Be careful not to burn yourself, as the engine and engine oil are hot.

CAUTION:
^

Oil filter is provided with relief valve. Use Genuine NISSAN Oil Filter or equivalent.

^

When removing, prepare a shop cloth to absorb any engine oil leakage or spillage.

^

Do not allow engine oil to adhere to drive belts.

^

Completely wipe off any engine oil that adheres to engine and vehicle.

3. Remove any foreign materials adhering to the oil filter installation surface.

4. Apply new engine oil to the oil seal contact surface of new oil filter as shown.

5. Screw on the oil filter manually until a slight resistance is felt, then tighten the oil filter an additional 2/3 turn as shown. Or tighten to specification.

6. Install the undercover.

Engine - Buzz/Whine From Timing Chain Area|Page 2760 > < Engine - Buzz/Whine From Timing Chain Area|Page 2758