Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
Ignition Coil: Specifications
IGNITION COIL
Removal and Installation
REMOVAL (LEFT BANK)
1. Remove engine cover with power tool.
2. Remove air cleaner case and air duct. (At the left bank side, remove ignition coil).
3. Move aside harness, harness bracket, and hoses located above ignition coil.
4. Disconnect harness connector from ignition coil.
5. Remove ignition coil.
CAUTION: Do not shock it.
INSTALLATION (LEFT BANK)
Installation is in the reverse order of removal.
REMOVAL (RIGHT BANK)
1. Remove intake manifold collector with power tool.
2. Move aside harness, harness bracket, and hoses located above ignition coil.
3. Disconnect harness connector from ignition coil.
4. Remove ignition coil.
CAUTION: Do not shock it.
INSTALLATION (RIGHT BANK)
Installation is in the reverse order of removal.