Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
4. Disconnect the two transfer control unit connectors.
5. Remove the transfer control unit bolts.
6. Remove the transfer control unit.
INSTALLATION
Installation is in the reverse order of removal.
^
When installing the transfer control unit, tighten bolts to the specified torque.
Transfer control unit bolts: 3.4 Nm (0.35 kg-m, 30 inch lbs.)
^
After the installation, check 4WD shift indicator pattern. If NG, adjust position between transfer assembly and transfer control unit.