nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Control Valve With TCM and A/T Fluid Temperature Sensor 2|Page 2427 > < Control Valve With TCM and A/T Fluid Temperature Sensor 2

Pathfinder 4WD V6-4.0L (VQ40DE) (2006)

Page 2
background image

4. Remove snap ring from A/T assembly harness connector.

5. Push A/T assembly harness connector.

CAUTION:  Be careful not to damage connector.

6. Remove oil pan and oil pan gasket.

7. Straighten the terminal clip to free the terminal cord assembly for A/T fluid temperature sensor 2 harness.
8. Disconnect A/T fluid temperature sensor 2connector.

CAUTION:  Be careful not to damage connector.

9. Straighten terminal clips to free revolution sensor harness.

10. Disconnect revolution sensor connector.

CAUTION:  Be careful not to damage connector.

Control Valve With TCM and A/T Fluid Temperature Sensor 2|Page 2427 > < Control Valve With TCM and A/T Fluid Temperature Sensor 2