Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
3. For the LH side only, remove the bolt from the lower joint of the lower joint shaft, then reposition the lower joint shaft out of the way.
CAUTION:
^
Do not damage the lower joint.
4. Remove cotter pin and nut from upper link ball joint.
5. Separate upper link ball joint stud from steering knuckle using Tool.
Tool number: ST29020001 (J-24319-01)
6. Remove upper link bolts and nuts.
INSPECTION AFTER REMOVAL
Upper Link
Check for deformation and cracks. Replace if necessary.
Upper Link Ball Joint
Check for distortion and damage. Replace if necessary.
INSTALLATION
Installation is in the reverse order of removal.
^
Tighten all nuts and bolts to specification. Refer to FSU-5, "Components".
CAUTION: Always replace drive shaft lock nut and cotter pin.
^
When installing wheel and tire, refer to Wheel Fastener.
^
After installation, check that the front wheel alignment is within specification.
Lower Link
Removal and Installation