Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
4. Remove the shock absorber upper and lower end bolts using power tool, and remove the shock absorber.
5. Remove the suspension arm upper nuts and bolts on the suspension member side using power tool.
6. Remove the suspension arm pinch bolt and nut on the knuckle side using power tool.
7. Disconnect the suspension arm from the knuckle using a soft hammer.
CAUTION: Do not damage the ball joint with the soft hammer.
8. Remove the suspension arm.
9. Remove the bound bumper from the suspension arm if necessary to transfer to the new suspension arm.
INSPECTION AFTER REMOVAL