Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
4. Remove the bolts and detach the transfer control device.
INSTALLATION
1. Install the O-ring to the transfer control device.
CAUTION:
^
Do not reuse O-ring.
^
Apply petroleum jelly to O-ring.
2. Install the transfer control device.
a. Turn the control shift rod fully counterclockwise using a flat-bladed screwdriver, and then put a mark on the control shift rod.
b. Align the transfer control device shaft cutout with the mark on the control shift rod, and install.
NOTE: Turn the transfer control device when the transfer control device connection does not match.