Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
CAUTION:
^
The boot may break if the boot installation length is less than the specified length.
^
Do not contact inside surface of boot with the tip of the screwdriver.
8. Secure the large and small ends of the boot using new boot bands as shown.
NOTE: Discard the old boot bands and use new ones for assembly.
9. After installing the joint sub-assembly and shaft, rotate the boot to check that it is positioned correctly. If the boot is not positioned correctly,
reposition the boot and secure the boot using a new boot band.