Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
9. Tighten bolt 1, 2 and 3 temporarily to prevent dislocation. After that tighten them in order (1 -> 2 -> 3). Then tighten other bolts.
10. Tighten control valve with TCM bolts to the specified torque. Refer to AT-233, "COMPONENTS".
11. Connect A/T fluid temperature sensor 2connector.
12. Securely fasten terminal cord assembly and A/T fluid temperature sensor 2 harness with terminal clips.
13. Connect revolution sensor connector.
14. Securely fasten revolution sensor harness with terminal clips.
15. Install oil pan to transmission case.
16. Pull up A/T assembly harness connector.
CAUTION: Be careful not to damage connector.