nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Body - Outside Door Handle(s) Stick/Bind In Cold Weather|Page 14226 > < Body - Outside Door Handle(s) Stick/Bind In Cold Weather|Page 14224
Page 6
background image

^ When you connect the Outside Handle Cable to the Outside Handle Bracket, make sure the Cable is routed as shown in Figures 1b and 1c above.

Re-Install Removed Parts

5. Re-install all previously removed parts in the reverse order.

NOTE:

^ On 2005 MY vehicles, install a new screen sealer to the door before the door finisher is re-installed.

^ The screen sealer is a foam watershield that goes between the door and the door finisher.

^ Screen sealer is listed in the Parts Information.

Operation Check

Body - Outside Door Handle(s) Stick/Bind In Cold Weather|Page 14226 > < Body - Outside Door Handle(s) Stick/Bind In Cold Weather|Page 14224